Box Type DIP Switch Description
MECHANICAL
1.Operation Force :800g Max
2.Stroke : 2.00mm
3.Operation Temp : -20~70 degree centigrade,
4.Storage Temp : -40 to 85degree centigrade;
ELECTRICAL
1.Electrical Life : 2000 operations cycles per switch 24 VDC, 25mA
2.Non-Switching Rating : 100mA, 50VDC
3.Switching rating : 25mA, 24VDC
4.Contact resistance : (a) 50 MO max. at initial; (b)100MO max. after life test
5.Insulation Resistance : 100MO;, 500VDC
6.Dielectric Strength : 500VAC/1 minute
7.Capacitance :5pF max
8.Circuit : Single pole single throw
SOLDERING AND CLEANING PROCESSES
1.Keep all switch contacts in their "OFF" position for all operations
2.WAVW SOLDERING : Recommended Solder Temperature at 50045126 (260degree centigrade) max. 5 seconds
3.HAND SOLDERING : Use a soldering iron of 30 watts, controlled at 60845126 (320degree centigrade)approximately 2 seconds while applying solder
4.CLEANING PROCESS : Flux clean using force rinse, high agitation or triple bath cleaning method. Freon TF or TE give excellent results. When vapor methods are used do not subject the switch to solvents at temperature above 12545126 (51°ree centigrade)
MATERIALS
1.BASE:ENGINEERING PLASTIC,Black
2.COVER:ENGINEERING PLASTCs,Red or Blue
3.BUTTON:ENGINEERING PLASTICS, White
4.TERMINAL:Alloy Copper,Gold plating
PACKING
All DIP Switches are shipped in standard IC tubes with all poles in the "OFF" position.
Exporters, Suppliers, Manufacturers,
Factories,Distributo,Wholesale Box Type DIP Switch, Exporters
, Box Type DIP Switch,Wholesale Box Type DIP Switch, Exporters, Suppliers,
Manufacturers, Factories,Distributo
